Hiring Events: Feb 3: Port Arthur | Feb 6: Lufkin | Feb 7: Lufkin | Texoma | Feb 8: Laredo | Nacogdoches | Feb 9: Southeast Texas | Nacogdoches | San Augustine | Texoma | More Job Fairs
TWC will perform system maintenance on Saturday, February 4 resulting in a two-hour intermittent outage starting at 10:00 pm. This outage will affect TWC web applications such as Unemployment Benefits Services, WorkInTexas, and Unemployment Tax Services.

Contract Type: Hearing Aid (6601)

The contractor and contractor staff that provide services described in this chapter also must comply with Chapters 1–3 of the VR Standards for Providers manual.

On this page:

6.1 Overview of Services for Hearing Aids and Related Accessories

The standards in this chapter apply to the purchase in whole or in part of hearing aids and related accessories for Texas Workforce Commission - Vocational Rehabilitation (VR) customers.

VR purchases hearing aids only from contracted manufacturers (contractors).

VR can authorize the purchase of rehabilitation technology, such as hearing aids, related accessories, and other forms of rehabilitation technology, only when it is vocationally necessary and is expected to improve the customer's ability to participate in VR services that are required to obtain, maintain, advance in, or regain employment as defined in the customer's individual plan for employment (IPE). For our customers in the Independent Living for Older Individuals Who Are Blind or Visually Impaired (ILS-OIB) services, purchases of this technology can be authorized if listed on the Independent Living Plan (IOP) to assist the customer in living confidently and independently in their homes and communities.

Contractors must comply with Texas Occupations Code §402.1021, Rules for Hearing Instruments, as applicable.

Return to Top

6.2 Description of Hearing Aids and Accessories

Accessories for hearing aids are useful add-ons that can be linked to a hearing aid to assist in hearing more clearly in challenging situations. Examples of accessories include Bluetooth devices and frequency modulation (FM) systems. VR does not purchase cosmetic accessories.

Analog hearing aids convert sound waves into electrical signals, which are amplified. Analog hearing aids are customized to meet the needs of each user. The aid is programmed by the manufacturer according to the specifications recommended by a hearing aid dispenser. Analog hearing aids have more than one program or setting and can be adjusted as needed. A hearing aid dispenser can program the aid using a computer, and individuals can change the program for different listening environments (for example, a small, quiet room; a crowded restaurant; and large, open areas, such as a theater or stadium). Analog and/or programmable circuitry can be used in all types of hearing aids.

Behind-the-ear (BTE) hearing aids consist of a hard plastic case worn behind the ear that is connected to a plastic ear mold that fits inside the outer ear. The electronic parts are held in the case behind the ear. Sound travels from the hearing aid through the ear mold and into the ear.

Canal hearing aids fit into the ear canal and are available in two styles. The in-the-canal (ITC) hearing aid is made to fit the size and shape of an individual's ear canal. A completely-in-canal (CIC) hearing aid is nearly hidden in the ear canal. Both types are used for mild to moderately severe hearing loss. Because they are small, canal aids can be difficult for an individual to adjust and remove. Additionally, canal aids have less space available for batteries and additional devices, such as a telecoil. Canal hearing aids are not for individuals with severe to profound hearing loss because their reduced size limits their power and volume.

Contralateral Routing of Signals (CROS) hearing aids treat unilateral hearing loss. The device takes sound from the ear with poorer hearing and transmits the sound to the ear with better hearing. Most systems are wireless and are used either behind the ear or custom built inside the ear. These wireless systems have replaced earlier wired units that were unreliable and bulky. These aids can be incorporated into eyeglasses. Transcranial CROS systems use the conductivity of the skull to transmit sound.

Digital hearing aids convert sound waves into numerical codes, similar to the binary code of a computer, before amplifying them. Because the code includes information about a sound's pitch or loudness, the aid can be specially programmed to amplify some frequencies more than others. Digital circuitry gives the hearing aid dispenser more flexibility in adjusting the aid to a user's needs and to certain listening environments. These aids also can be programmed to focus on sounds coming from a specific direction. Digital circuitry can be used in all types of hearing aids.

In-the-ear (ITE) hearing aids fit completely inside the outer ear and are used for mild to severe hearing loss. The case holding the electronic components is made of hard plastic. ITE aids can have added features installed, such as a telecoil.

Open-fit hearing aids fit completely behind the ear, with only a narrow tube inserted into the ear canal, enabling the canal to remain open. They are often used for individuals who experience a buildup of earwax, since this type of aid is less likely to be damaged by such substances. Some individuals may also prefer the open-fit hearing aid because their perception of their own voice is less distorted.

Telecoil is a small magnetic coil that allows users to receive sound through the circuitry of the hearing aid, rather than through its microphone. This makes it easier to hear conversations over the telephone. A telecoil also helps individuals hear in facilities that have installed special sound systems called induction loop systems. These systems can be found in many churches, schools, airports, and auditoriums.

Return to Top

6.3 Returns

Contractors must provide written notification to the VR contact name on the service authorization (SA) that the hearing aid and/or accessories have been returned.

This notice must include the following:

  • The SA number associated with the returned item(s);
  • A description of the item(s) returned;
  • The date the item was received by the contractor; and
  • Whether payment has been received for the item(s).

VR staff must submit a new SA for the new item(s) replacing the previously ordered item(s).

Return to Top

6.4 Refunds

When hearing aids/accessories are returned to the contractor that are incorrect, defective, or do not function properly for the customer, and payment has been received by the contractor, the contractor shall issue a refund in the form of a physical check for the item(s) within thirty (30) calendar days of receipt of the item(s) to:

Texas Workforce Commission - Rehabilitation Services Division
101 E. 15th Street - 144T
Austin, TX 78778-001
ATTN: Program Specialist for Deaf and Hard of Hearing

Exception to the thirty (30) calendar day refund, refunds may be delayed until such time as the account becomes current if the TWC-VR unit's account is past due. The refund must be supported by documentation identifying the associated SA number and the description of the item(s) being refunded. 

Return to Top

6.5 Warranty

Hearing aids purchased with VR funds must have a minimum three-year warranty. Hearing aid accessories purchased with VR funds must have a minimum one-year warranty.

No deductibles may be invoiced for hearing aids or hearing aid accessories.

Return to Top

6.6 Methodology for Payment

The following established discounts apply to the purchase of all hearing aids and accessories:

  • Hearing aid(s) at least 35 percent discount from the manufacturer’s list price; and
  • Accessories at least 25 percent discount from the manufacturer’s list price.

Return to Top

6.7 Process and Procedure

The contractor provides the Program Specialist for Deaf and Hard of Hearing with the list price and the VR net price by either supplying a price list or a written quote via email to VR.DHH@twc.texas.gov.

Once the hearing aid recommendations are approved by the VR counselor, an SA will be issued to the contractor for the purchase of the hearing aid(s) and any accessories.

TWC staff will then submit the SA for the hearing aid(s) including accessories, if any, and the manufacturer's completed order form to the contractor for fulfillment. The contractor ships the hearing aid(s) and any accessories to the hearing aid dispenser for dispensing.

Return to Top

6.8 Outcomes Required for Payment

For the contractor to receive payment, the contractor must do the following:

  • Provide new hearing aid(s) and accessories as specified on a SA at the rate established in 6.6 Methodology for Payment (used or refurbished aids may not be used to meet this requirement);
  • Deliver the products to the specified address on the date and time mutually agreed upon by the VR counselor, customer, and contractor within 10 days of receipt of the SA date or notify the VR staff member listed on the SA of the estimated delivery date upon receipt of the SA;
  • Deliver the products in an assembled and fully functional state, including adaptations or fabrication of parts (parts and labor) necessary to meet the described individual needs of the customer; and
  • Provide a warranty as described in 6.5: Warranty

The contractor must submit an invoice for payment that must comply with the requirements explained in Chapter 3: Basic Standards, and must include the warranty coverage date or warranty expiration date.

The date when the customer receives the hearing aid, as noted on the VR3105E, Hearing Aid Fitting and Post-Fitting Report, will be the date used for the 30-day return policy.

Return to Top